AGPtek U1 Manual De Instrucciones página 4

Charge the Player
Use 5V/500mA charger for charging.
Plug one end of the micro USB cable into the USB port of a computer, the other end
to the port on your device. While it is fully charged, disconnect the cable from your
device by pulling it straight outward.
Power On/Off
1. Power On: Slide the power switch to "On" position. If the switch already at "On"
position, just press the button
2. Power Off:
1) Slide the power switch to "Off" position.
2) Press play button
Note:
1) Please put the power button to "Off" position if you won't use it for a long time.
2) If you cannot switch on the player, please make sure the slider switch is "on".
Lock Screen
Hold button to lock the screen. Repeat to unlock.
for 3 seconds.
for 3 seconds when the switch at "On" position.
2