Publicidad
VALPES company - 89, rue de Etangs - 38430 Moirans - France, gives evidence that his 1/4 turn electric actuators
are produced, in compliance with the ATEX 94/9/CE directive intended to be used in explosive atmosphere, are in compliance
with the certificate of exam type LCIE 06 ATEX 6006X (available on demand) and have a production quality notification LRV
0038 / ATEX / 4000996 / A.
The conditions to use of our actuators VRX and VSX are defined with their ATEX classification :
II 2 G D
Ex d IIB T6 Gb - Ex tb IIIC T80°C Db
II:
Group II, devices intended to be used in places, others than mines or fire-damp installations
susceptible to be put in danger by explosive atmospheres.
2:
Category 2, likely, but coincidental presence of explosive atmospheres.
GD:
Presence of Gas or vapors and/or dust.
EX:
Electric material foreseen for explosive atmospheres.
d & tb: Protection by explosion proof housing.
IIB:
Places where explosive hydrocarbon atmosphere is established (constituted) (Ethylene, nitrogenous products, oxygenated, halogens).
IIIC:
Places where atmosphere is constituted of conductive dusts
T5:
Maximal surface Temperature 100°C. Ambient temperature of use: -20°C in +70°C
T6:
Maximal surface Temperature 85°C. Ambient temperature of use: -20°C in +70°C.
Gb:
Equipment protection level in the presence of gas: Zone 1
Db:
Equipment protection level in the presence of dust: Zone 21
T80°C : Maximal surface temperature for dust atmospheres 80°C.
T95°C : Maximal surface temperature for dust atmospheres 95°C
The devices are in comliance with the following norms :
EN 60079-0 (2012) / EN 60079-1 (2007) / EN 60079 -31 (2009)
The electric connecting has to respect current ATEX recommendations (BE3 conditions of NF C-15100 and EN 60079-14).
The notified body in charge of the production quality surveillance is LRV (N°0038) :
LLOYD REGISTER VERIFICATION LIMITED , 71 Fenchurch Street London EC3M 4BS, UK.
The VALPES company, as the manufacturer declares herewith, that the above mentioned electric VALPES part-turn actuators are
in compliance with the following directives :
- Directive on Electromagnetic Compatibility (EMC)(2004/108/CE)
EN 61000-6-2 (2006) : Immunity
EN 61000-6-4 / A1 (2011) : Emissions
- Low-voltage Equipment Directive (2006/95/CE)
EN 61010-1 (2011)
- Machinery Directive (2006/42/CE)
VALPES part-turn actuators covered by this Declaration must not be put into service until the entire machine, into which they are
incorporated, has been declared in conformity with the provisions of the directive.
VALPES Valve Control System
ZI CENTR'ALP - 89 rue des Étangs - F 38430 MOIRANS
Tél. : (+33) 04-76-35-06-06
Fax : (+33) 04-76-35-14-34
E-mail : info@valpes.com / Site web : www.valpes.com
We declare under our responsibility that the products noted have been designed and manufactured in accordance with requirements of the directive. Mounting and
connecting instructions defined in catalogues and technical data sheets must be adhered to by the user. This declaration does not include any guarantee or certain
characteristics.
DSBA3401 - Révision 08/07/2014
VRX25 - VRX45 - VRX75
VSX100 - VSX150 - VSX300
VALPES
VALVE CONTROL SYSTEM
EC DECLARATION OF CONFORMITY
For 400V actuators and actuators with EBS.24 :
Ex d IIB T5 Gb - Ex tb IIIC T95°C Db
Moirans, le
P. GUILLAUD-SAUMUR, ATEX responsible
19/06/2014
37/39
Publicidad
Capítulos
