Harbor Breeze 40101 Manual De Instalación página 17

FINAL INSTALLATION
7. Remove one of the switch housing plate screws
(MM) from the switch housing plate (K), and loosen
(do not remove) the other two screws. Insert the
wires from the motor assembly (E) through the hole
in the fitter plate (I).
Hardware Used
Switch Housing
MM
Plate Screw
8. Attach the fitter plate (I) to the switch housing plate
(K) by twisting the fitter plate (I) until the loosened
switch housing plate screws (MM) engage the key
slots on the fitter plate (I). Re-install the third switch
housing plate screw (MM) into the closed hole in the
fitter plate (I) and securely tighten all three switch
housing plate screws (MM).
Hardware Used
Switch Housing
MM
Plate Screw
9. Cconnect the plug from the motor assembly (E) to
the plug from the switch housing (G), and ensure the
connections are secure.
7
E
x 3
MM
8
x 3
I
9
I
Lowes.com/harborbreeze
17
K
I
K
MM
E
G