Harbor Breeze 40101 Manual De Instalación página 8

INITIAL INSTALLATION
4. Remove the two mounting bracket screws (HH) from
the round holes of canopy (B). Set aside for later
use. Detach mounting bracket (C) from canopy (B).
Hardware Used
Mounting
HH
Bracket Screw
5. Feed black, blue and white wires from the plug on the
mounting bracket (C) up through the hole in the top.
6. Remove and discard the three rubber stoppers and
the five plastic spacers from the underside of the
motor assembly (E).
For Standard or Angle Mounting Instructions,
continue to page 9. For Closemount Instructions,
proceed to page 12.
4
x 2
B
5
C
6
Rubber
Stopper
Lowes.com/harborbreeze
8
C
HH
Plastic
Spacer
E