Final Installation - Harbor Breeze 40101 Manual De Instalación

FINAL INSTALLATION

Note: Downrod (A) is shown/referenced, but instructions are applicable to both standard and
closemount-style installations.
1. Wrap the wire harness coming from the downrod
(A) around the hooks on the back of the mounting
bracket (C).
Note: Extra wire harness length accommodates
longer downrods (sold separately).
2. Connect the pin connector from the mounting
bracket (C) to the pin connector at the end of the wire
harness.
3. Align the key slots on the canopy (B) with the heads
of the mounting bracket screws (HH) preassembled
on mounting bracket (C). Lift the canopy (B) up and
rotate it clockwise until the mounting bracket screws
(HH) engage the key slots.
Hardware Used
Mounting Bracket
HH
Screw
1
2
3
x 2
B
Lowes.com/harborbreeze
15
C
Hook
A
C
A
HH