Inserting The Bobbin - Singer 3337 Manual De Instrucciones

⚠
Turn power switch off before inserting or removing the bobbin.
A
B
GETTING READY TO SEW
1
1. When inserting or removing the bobbin, the needle and
presser foot must be fully raised.
2. Remove the bobbin cover plate and bobbin.
3. Insert the bobbin in the bobbin case with the thread
running in a counterclockwise direction (arrow).
4. Pull the thread through the slit (A).
5. With a finger held gently on top of the bobbin, place
thread into guides as shown.
6. To cut off excess thread pull it toward you to cut it with
the cutter at point (B). Replace the bobbin cover plate.

Inserting the Bobbin

2
13