Klarstein 10032099 Manual De Inicio Rápido página 25

Filling with coffee beans
1 Remove the grinder cover (1).
2 Make sure that the water tank lid (4) is closed to prevent coffee beans from falling
into the water tank.
3 Pour the coffee beans into the grinder (2). Do not overfill!
4 Replace the cover (1) on the grinder (2).
Inserting a new filter bag
Press the unlocking button (5) to open the filter compartment (10). Place a size 4 filter
bag into the filter insert (1 1). Close the filter compartment (10).
Specifying the number of cups
Press and hold the button (27) until the required number of cups is displayed.
Note: The following settings are possible: 2, 4, 6, 8, or 10 cups. The number of cups
set will be stored until either a new number of cups is entered or the plug is removed
from the socket for more than a minute.
Setting the coffee strength
Press and hold the button for the coffee strength (25) until the display shows the desired
strength.
Note: The following settings are possible: light, medium and strong. The set coffee
strength will be stored until either a new coffee is entered or the plug is removed from
the socket for more than a minute.
Particularly strong coffee
Press the button for strong coffee (28) to prepare a particularly strong coffee (similar to
espresso). The display reads 2-4. Pressing the button (28) switches the number of cups
between 2 and 4.
Note: This function can be activated only if 2 or 4 cups of coffee have been set. Press
the button (27) to switch this function off. The 2-4 symbol in the display goes off.
EN
25