Klarstein 10032099 Manual De Inicio Rápido página 31

If the grinder shaft becomes blocked during the grinding process
Changing the activated carbon filter
Change the activated carbon filter after brewing 70 times or when the Smiley symbol
starts flashing in the display. Please proceed as follows:
1 Press the Smiley button (29) to switch off the filter change reminder. The symbol on
the display goes out.
2 Take the filter holder (15) from the water tank (13) and open the filter container flap
and remove the used activated carbon filter.
3 Remove the activated carbon filter (16) from its plastic packaging and thoroughly
rinse under running water in order to remove any potential production residues.
Place the new filter in the filter container and close the filter container flap.
Slide the filter holder (15) into the recess (arrow).
5 Press the Smiley button (29) to activate the filter change reminder.
Push the locking button (on the symbol) with a
pointed object and remove the lid.
Clean the grinder shaft (14) with the cleaning brush
supplied.
EN
31