Klarstein 10032099 Manual De Inicio Rápido página 28

EN
28
Brewing coffee with coffee beans
Activate the display lighting by pressing any key. The lighting goes out 60 seconds after
the last button was pressed.
1 Fill the water tank with water as described in the section
Filling with water.
2 Fill the appliance with coffee as described in the section
Filling with coffee beans.
3 Insert an empty unused filter bag as described in the section
Inserting a new filter bag.
4 Select the desired number of cups as described in the section
Setting the number of cups.
5 Set the desired strength of coffee as described in the section
Setting the coffee.
6 Set the grinding fineness as described in the section
Setting the grinding fineness.
7 Press the Start button (19) to switch on the grinder. The indicator lamp (18) lights
up, the freshly ground coffee powder is transported into the filter compartment (10)
through the chute and the coffee is brewed.
Press the Start button (19) to stop the brewing process and switch the appliance
off. The indicator lamp (18) goes off; the appliance is switched off. The appliance
automatically switches itself off after 2 hours
Brewing coffee with coffee powder
Activate the display lighting by pressing any key. The lighting goes out 60 seconds after
the last button was pressed.
1 Fill the water tank with water as described in the section
Filling with water.
Insert an empty unused filter bag as described in the section Inserting a new filter
2
bag. With the help of the measuring spoon supplied (1 level spoon per cup), fill
the filter bag with the required amount of coffee powder up to a maximum of 2 cm
under the filter edge
3 Press the Start button (26) to start brewing the coffee. The indicator lamp (24) lights
up and the coffee is brewed.
Press the Start button (19) to stop the brewing process and switch the appliance
off. The indicator lamp (18) goes off; the appliance is switched off. The appliance
automatically switches itself off after 2 hours