Description Of The Device; Features - Futurelight 575 SPOT Pro-Head-Spot Manual Del Usuario

The device must only be installed on a non-flammable surface. In order to safeguard sufficient ventilation,
leave 50 cm of free space around the device. Please note that heat-sensitive objects may be deformed or
damaged by the emitted heat.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
For overhead use (mounting height >100 cm), always fix the fixture with an appropriate safety-rope. Fix the
safety-rope at the correct fixation points only. The safety-rope must never be fixed at the transport handles!
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly
fastened.
The lamp must never be ignited if the objective-lens or any housing-cover is open, as discharge lamps may
explose and emit a high ultraviolet radiation, which may cause burns.
The maximum ambient temperature T = 45° C must never be exceeded.
a
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.

DESCRIPTION OF THE DEVICE

Features

Powerful DJ-Moving-head
• Colour-system: 2 colour-wheels
• Colour-wheel 1 with 9 different, dichroic colour-filtres and white
• Colour-wheel 2 with 6 different, dichroic colour-filtres and white and additionally with correction-filters 3,200
K and 6,000 K and UV-filter
• Via the two correction-filters, up to 64 different colours and semi-colours can be created
• Rainbow-effect in both directions
• Gobo-wheel 1 with 9 static metal-gobos and open
• With gobo-shake function for static gobos
• Gobo-wheel 2 with 2 rotating metal-gobos, 4 multicolor-dichro-gobos and open
• The rotating gobos can be interchanged
• Via the combination between dichro-gobos and color-wheel or multicolor-dichro-gobo even more colour-
combinations possible
• High-speed rotating 3-facet prism
• Remotely controllable motorized focus
• Combined shutter/dimmer unit allowing very smooth dimming and strobo effect 1-10 flash per sec.
• Remotely switching of the lamp
• Macro-function for rotating gobos/rotating prism combinations
• Black-out while Head moving or gobo/colour/prism changing
• Remotely controllable speed of Pan/Tilt movement for easy programming
• Remote reset function
• Silent fans cooling; remotely controllable speed of fans
• 16 DMX-channels - 16 bit Pan/Tilt movement resolution
• 14 DMX-channels - 8 bit Pan/Tilt movement resolution
• Pan-movement range 530°
• Tilt-movement range 280°
• Motorized multi-step-zoom with three different apertures (15°, 18° and 22°)
• Steplessly adjustable iris
• Control-Board with 4-digit display for adjusting the DMX-starting address
• For MSR 575/2 or MSR 575 lamp
• DMX-control via every standard DMX-controller
31/97 51839570_V_1_0.DOC