Stihl HT 250 Manual De Instrucciones página 40

English
Definitions
1 Handle Hose
For holding and controlling the unit
with the hand during operation.
2 Fixed Drive Tube
Encloses and protects the drive
shaft between the engine and
gearbox.
3 Carrying Ring
Connects the unit to the harness.
4 Slide Control
For starting throttle, run and stop.
Keeps the choke partially open
during starting and switches off the
ignition to stop the engine.
5 Throttle Trigger Lockout
Must be depressed before the
throttle trigger can be activated.
6 Throttle Trigger
Controls the speed of the engine.
7 Choke Knob
Eases engine starting by enriching
mixture.
8 Manual Fuel Pump
Provides additional fuel feed for a
cold start.
9 Air Filter Cover
Covers and protects the air filter
element.
10 Fuel Tank
For fuel and oil mixture.
11 Machine Support
For resting machine on the ground.
12 Oil Filler Cap
For closing the oil tank.
38
13 Oilomatic Saw Chain
A loop consisting of cutters, tie
straps and drive links.
14 Guide Bar
Supports and guides the saw chain.
15 Oil Tank
Tank for chain lubricating oil.
16 Chain Guard (Scabbard)
To protect the operator from
touching the chain.
17 Chain Sprocket Cover
Covers the clutch and chain
sprocket.
18 Hook
For pulling branches away.
19 Chain Sprocket
The toothed wheel that drives the
saw chain.
20 Chain Tensioner
Permits precise adjustment of chain
tension.
21 Fuel Filler Cap
For closing the fuel tank.
22 Carburetor Adjusting Screws
For tuning the carburetor.
23 Starter Grip
The grip of the pull starter, for
starting the engine.
24 Spark Plug Boot
Connects the spark plug with the
ignition lead.
25 Muffler (with Spark Arresting
Screen)
Muffler reduces exhaust noises and
diverts exhaust gases away from
operator.
Spark arresting screen is designed
to reduce the risk of fire.
26 Spacer
Designed to reduce the risk of burns
and fire.
# Serial Number
HT 250