Maytag 4GMVWC400 Manual De Uso Y Cuidado página 6

RINSE LiD LOCKED
sensing wash rinse spin done lid locked
You will hear sounds similar to the wash cycle as the
washer rinses and moves the load. Fabric softener will
be added if the Fabric Softener Added-Yes option was
selected. Some cycles will use a spray rinse.
SPIN
sensing wash rinse spin done lid[asked
The washer spins the load at increasing speeds for proper
water removal, based on the selected cycle and spin
speed.
DONE
sensingwash rinse spin done lidtocked
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
sensingwash rinse spin done lid Locked
To allow for proper load sensing and spinning, the lid will
lock and the Lid Locked light will turn on. This light
indicates that the lid is locked and cannot be opened.
If you need to open the lid, press
START/Pause/Unlock. The lid will unlock
once the washer movement has stopped.
This may take several minutes if the load
was spinning at high speed. Press START/
Pause/Unlock again to resume the cycle.
Avoid opening the lid during sensing. The
sensing process will start over when the
washer is restarted.
D start
_auseiunlock
O hold3sec,
to cancel
6