Select Cycle; Pull Control Dial Out To Start - Maytag CW-2 Guía De Uso Y Cuidado

Using the Controls
STEP 6

Select Cycle

To select a cycle, push the control dial IN and turn until
the pointer is at the soil level needed for the wash load.
Handwash Cycle
Intermittent slow agitation and soak for
delicate fabrics needing slow spin speed
because of clothing construction.
LIGHT:
approximately 9
minutes of agitation
and soak.
EXTRA LIGHT:
approximately
3 minutes of agitation and
soak.
Delicates Cycle
Delicates is designed for items
requiring delicate wash action
and uses the following settings:
NORMAL: approximately 9
minutes of wash time.
LIGHT: approximately 6 minutes
of wash time.
EXTRA LIGHT (select models):
approximately 3 minutes of wash time.
STEP 7

Pull Control Dial Out to Start

You may stop the washer at any time by simply
pushing the control dial IN. Therefore it is possible to
obtain a non-agitated soak or to shorten, skip or
repeat any part of a cycle. The control dial must be
pushed IN (off position) when you change the setting.
Regular Cycle
Regular Cycle is used for normal,
sturdy fabrics and uses the
following settings:
PREWASH (select models): adds
approximately 6 minutes of wash
time.
EXTRA HEAVY: approximately 18
minutes of wash time.
HEAVY: approximately 15 minutes
of wash time.
NORMAL: approximately 12
minutes of wash time.
LIGHT: approximately 9 minutes of
wash time.
Wrinkle Free Fabrics
This cycle is designed for sturdy
fabrics needing a slower spin speed
to reduce wrinkling, such as dress
shirts and dress pants.
NORMAL: approximately 12
minutes of wash time.
LIGHT: approximately 9 minutes of
wash time.
EXTRA LIGHT: approximately 6
minutes of wash time.
6