Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
considerably with repeated use as the skin
adapts to the process.
Epilation is easier and more comfortable
when the hair is at the optimum length of
2–5 mm (0.08 – 0.2 in.). If hairs are longer, we
recommend that you either shave first and
epilate the shorter, re-growing hairs after 1 or
2 weeks.
When epilating for the first time, it is
advisable to epilate in the evening, so that
any possible reddening can disappear
overnight. To relax the skin we recommend
applying a moisture cream after epilation.
Fine hair which re-grows might not grow
up to the skin surface. The regular use of
massage sponges (e.g. after showering) or
exfoliation peelings helps to prevent in-
growing hair as the gentle scrubbing action
removes the upper skin layer and fine hair
can get through to the skin surface.
Description
1a Massage system
1b Efficiency cap
2
Epilation head
3
«smartlight»
4
Switch with lock keys (4a)
5a Charging light
5b Low charge light
6
Release button
7
Special cord set
8
Shaver head attachment with OptiTrim
comb
Charging
•
Before use, charge the appliance. For best
performance, we recommend that you
always use a fully charged appliance.
Using the special cord set, connect the
appliance to an electrical outlet with the
motor switched off. Charging time is
approximately 1 hour.
•
The green charging light (5a) flashes to
show that the epilator is being charged.
When the battery is fully charged, the
charging light shines permanently. Once
fully charged, use the appliance without
cord.
•
When the red low-charge light (5b) flashes,
reconnect the appliance to an electrical
outlet via the special cord set to recharge
it.
•
A full charge provides up to 40 minutes of
cordless operation time. Maximum battery
capacity will only be reached after several
charging/discharging cycles.
•
The best environmental temperature for
charging is between 41 °F and 95 °F.
•
As a safety feature to avoid the unlikely
event of the appliance overheating, the
charging lights may flash (red/green). After
cooling down, the appliance will continue
charging with the green charging light
flashing.
Getting prepared for ...
... dry usage
Make sure your skin is dry and free from
grease or cream.
... wet usage
The appliance can be used on wet skin, even
under running water. Make sure that the skin
is very moist in order to achieve optimum
gliding conditions for the appliance.
Additionally, you may apply some shower gel
to the moist skin for results that will leave
your skin beautifully soft and smooth after
wet epilation.
•
Before use, always make sure that epilation
head is clean.
•
Always make sure that the epilation head
(2) is provided with a cap (1).
•
To change caps, press their lateral ribs and
pull off.
9
Publicidad
Tabla de contenido
