Publicidad
Idiomas disponibles
Idiomas disponibles
OBJ_BUCH-0000000263-001.book Page 15 Thursday, June 30, 2016 3:46 PM
Setting the stroke rate (figure 5).
Set the required stroke rate according to the
material being worked.
The stroke rate can be preset in 6 steps with
the control knob for continuously variable
stroke adjustment.
Level 6: Steel and aluminum.
Level 1 – 6: Plastic.
Handling the battery.
Operate and charge the battery only within
the battery operating-temperature range of
0°C – 45°C (32°F –113°F). At the beginning
of the charging procedure, the battery tem-
perature must be within the battery operat-
ing-temperature range.
Battery charge-control indicator
(figure 6).
Press the button to activate the LED indica-
tion.
LED indi-
Meaning
cator
1 – 4
Percent-
green LED
age of
charge
condition
Continu-
Battery is
ous red
almost
light
empty
Red flash-
Battery is
ing light
not ready
for opera-
tion
The real percentage of the battery charge
condition is only indicated when the power
tool motor is stopped.
The electronics automatically switch off the
motor prior to the battery being deep dis-
charged.
Activity
Operation
Charge battery
Bring the battery
into the battery
operating-temper-
ature range, then
charge
Fig. 5
Continuously variable
stroke adjustment
6
5
4
3
Fig. 6
en
15
2
1
≤
100 %
≤
75 %
≤
50 %
≤
25 %
=
0 %
Publicidad
