Seat Functions And Operation; Weight Adjustment; Height Adjustment; Fore/Aft Adjustment - Grammer MAXIMO Basic Manual De Instrucciones

* if fitted ** depending on model
GB

Seat functions and operation

Weight adjustment

The seat is adjusted for the driver's weight by
turning the weight adjuster lever with the seat
empty. The set weight can be read from the
indicator.
To prevent damage to the health, the
setting for the driver's weight must be checked
and adjusted as necessary before the vehicle
is driven.

Height adjustment

The seat height can be adjusted with several
settings.
Raise the driver seat to the required height
until it audibly latches into place. When the
seat is raised above the highest setting
(endstop) it drops back down to the lowest
position.

Fore/aft adjustment

The fore/aft adjustment is released by lifting
the locking lever.
WARNING. Risk of accident!
Do not operate the locking lever
while driving.
After the adjustment, the locking lever
must latch into the desired position with an
audible click. It should not be possible to
move the driver's seat into another position
when it is locked.
Do not lift the locking lever with your leg
or calf.
*** optional extra
21