Seat Functions And Operation; Weight Adjustment; Height Adjustment; Swivel - Grammer MAXIMO XT PROFESSIONAL Manual De Instrucciones

* if fitted ** depending on model
1
2
*** optional extra

Seat functions and operation

Weight adjustment

The seat must be adjusted for the driver's
weight by briefly pulling the actuator lever of
the automatic weight and height adjuster
(arrow) with the vehicle at a standstill and the
driver sitting on the seat
The driver must sit absolutely still during
adjustment.
Before adjusting the weight, adjust
shock absorbers to the position "soft".

To prevent damage to the health, the
setting for the driver's weight must be
checked and adjusted individually before the
vehicle is driven.

Height adjustment

The seat height can be set pneumatically and
is continuously adjustable.
The seat height can be altered by pulling or
pushing the adjustment lever fully up or down
(arrow). If the adjustment reaches the top or
bottom endstop, the height is adjusted
automatically in order to guarantee a
minimum spring travel.
Before adjusting the height, adjust
shock absorbers to the position "soft".
 
In order to avoid damage, do not
operate compressor for more than 1 minute

Swivel

The swivel is released by pulling the locking
lever. It allows free swivelling of the driver's
seat to the right or left up to an end stop.
WARNING. Risk of accident!
Do not operate the locking lever for
swivel while driving.
After the adjustment, the locking lever

must latch into the desired position with an
audible click. It should not be possible to
move the driver's seat into another position
when it is locked.
.
23