Protective Grid - bora CKAS-UM-0030512 Manual De Instrucciones Y Montaje

Sistema extractor de encimera
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Mounting instructions
GB
Now connect the patch cable to the electronic
control of the hob extractor.
Ensure that it is not exposed to any tensions.
The substructure module is now mounted.
Trim the substructure frame to the required
dimensions before mounting. Use the provided
section marks as a cross section of the dovetail
saw.
Subsequently place the protective grid.
When mounting, first insert the rear end of the
module in the flange of the silence module.
Subsequently press the substructure frame
upwards, in the intended grid nose of the hob
extractor.
46

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido