Description; Technical Data - SKF TMJL 100 Instrucciones De Uso

1. Description

The TMJL 100 has a maximum pressure of
100 MPa (14 500 psi) and delivers a volume per
(0.06 in
stroke of 1 cm
3
for use on HMV nuts, bolt tensioners, hydraulic
pullers etc, but is also suitable for other oil injection
applications where a maximum pressure of
100 MPa (14 500 psi) is required. The pump is
supplied with a 3 metre long, high pressure hose

2. Technical data

Maximum pressure
Volume per stroke
Oil container capacity
Handle force at 100 MPa
Pressure hose
Connection nipple
Oil viscosity of mounting luid
Weight (illed with oil)
Designation
4 EN
). It is mainly intended
3
100 MPa (14 500 psi)
(0.06 in
1 cm
3
800 cm
3
320 N (70 lbf)
3 m (10 ft) long with quick connection coupling
G / , external or internal thread
1
4
300 mm
13 kg (29 lb)
TMJL 100
with quick connection coupling. Mating quick
connection nipple for attachment to the workpiece is
included. The pump is illed with SKF mounting luid
LHMF 300 and comes with an additional 1 litre can
with the same luid.
Everything is packed in a sturdy case. The pump has
an over-pressure valve and a pressure gauge. The
release valve is an integrated part of the pump head.
)
3
(49 in )
3
/s (1 400 SUS) at 20 °C
2