Application; Air-Driven Oil Pumps Thap 030E And Thap 150E; Air-Driven Oil Injectors Thap 300E And Thap 400E; Description - SKF THAP E Serie Instrucciones De Uso

1. Application

1.1 Air-driven oil pumps THAP 030E
and THAP 150E
The THAP 030E is designed to have an oil outlet
pressure of 30 MPa (4 350 psi).
The THAP 150E is designed to have an oil outlet
pressure of 150 MPa (21 750 psi).
Depending on the maximum oil pressure required,
they are suitable for applications such as bolt
tensioning and pressurizing large hydraulic nuts.
Compared to hand operated oil pumps, the use of
air-driven oil pumps can save considerable time
and effort.
1.2 Air-driven oil injectors THAP 300E
and THAP 400E
The THAP 300E is designed to have an oil outlet
pressure of 300 MPa (43 500 psi).
The THAP 400E is designed to have an oil outlet
pressure of 400 MPa (58 000 psi).
Depending on the maximum oil pressure required,
they are particularly suitable for mounting and
dismounting large pressure joints. This includes
applications such as SKF OK Couplings, lywheels,
gear wheels, railway wheels and impellers.
Compared to hand operated oil injectors, the use of
air-driven oil injectors can save considerable time
and effort.
4 EN

2. Description

The THAP ...E series contains an oil pump or
injector driven by an air motor, with the air pressure
internally limited to 7 bar, which is used to produce
high oil pressure.
The THAP ...E series are delivered ready for use.
They are supplied in a transport box and include
suction and return hoses with quick-connection
couplings. They are equipped with a male G
piece, which is intended to be screwed directly into
the workpiece.
As an alternative, they can be used in combination
with the appropriate SKF hydraulic accessories.
Complete sets consisting of the air-driven oil pump
or injector are shown in
/ nose
3
4
.
† section 6