Mounting The Microphone; Installation Example Using The Original Mounting Bracket - Alpine X803D-U Manual De Instalación

Mounting the Microphone

For safe use, make sure of the following:
• Location is stable and firm.
• Driver's view and operations are not obstructed.
• Microphone is located where the driver's voice can be easily
picked up (for example, on the sun visor).
When you speak into the microphone, you should not have to change
your driving posture. This may cause a distraction, taking your
attention away from safely driving your vehicle. Carefully consider
direction and distance while mounting the microphone. Confirm that
the driver's voice can be easily picked up at the selected location.
Microphone
Cable clamp
(Sold separately)
Installation example using the Original
Mounting Bracket
1
Mount the original mounting bracket to the unit using
the supplied screws.
Ground Lead*
Chassis
Original Mounting Bracket
Screws (M5 × 8) (Included)
* To securely connect the ground lead, use an already installed screw on a
metal part of the vehicle (marked (
vehicle's chassis.
2
Connect all other leads of the unit according to details
described in the "Connections" (page 5).
3
Mounting the unit in a car.
• Fix the cables carefully. Do not damage them by tucking them into
movable parts, such as a seat rail, or by locating them against sharp or
pointed edges.
4
-EN
Face plate (Included)
)) or a clean, bare metal spot on the
Note on using HDMI Connection Cables
When using HDMI connection cables, secure the cables to the HDMI
Terminals with the supplied HDMI Fixation Bracket.
1
Slide the HDMI Fixation Bracket into the grooves (A).
2
Secure it with the screw (B).
HDMI Terminal
(A) (A)
HDMI Fixation Bracket
(Included)
(B)