English - Bosch MUZ5FW1 Serie Instrucciones De Uso

en

English

For your safety
The accessories are suitable for the food processor MUM5.... .
Follow the operating instructions for the food processor MUM5.... .
This appliance is suitable for mincing and mixing raw or cooked
meat, bacon, poultry and fish. It must not be used for processing
other objects or substances. Other applications are possible if the
accessories approved by the manufacturer are used.
Safety instructions for this appliance
A Risk of injury
Do not reach into the feed tube, always use the pusher to add more
ingredients. Do not attach / remove the mincer until the drive is at a
standstill.
A Important!
Use the mincer in the specified operating position only. The mincer
must be completely assembled before use. Never assemble the
mincer attachment on the base unit.
Overview
Please fold out the illustrated pages.
Figure
A:
1 Mincer attachment
a Threaded ring
b Perforated disc
(hole diameter 4.5 mm)
c Blade
d Worm gear with driver
e Locking lever
f Seal
2 Filler tray
3 Pusher
Optional accessories
4 Fruit press attachment
5 Viennese whirl attachment
6 Grater attachment
7 Perforated disc
(hole diameter 3 mm and 6 mm)
Figure B:
Operating position
6
MUZ5FW1_for_MUM58257 8001019164.indb 6
Protection from overload
To prevent serious damage to your appli-
ance if the mincer is overloaded, the driver
has a notch (predetermined breaking point).
If an overload occurs, the driver breaks
instead. However, the driver can easily be
replaced. A new driver is available from
customer service.
■ Unscrew fastening screw on the worm
gear.
■ Replace driver.
■ Tighten fastening screw.
22.06.2015 11:55:08