Kalorik FT 44466 Manual De Instrucciones página 9

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Packaging materials are not toys. Always keep plastic bags, foils
and foam parts away from babies and children. Packaging
material could block airways and prevent breathing.
NOTE:
The appliance may produce an odor and/or emit smoke when
switched on for the first time, as residues from the production
process are eliminated. This is normal and does not indicate a
defect or hazard. Ensure ample ventilation.
Clean the appliance thoroughly before using for the first time (see
Cleaning and Maintenance).
ASSEMBLY
Place the appliance on a clean, flat and heat resistant surface.
Before using your appliance make sure:
the oil reservoir is secured in the correct position with the oil filter
cover and oil valve are on the same side than the oil filtration
control knob. Ensure the oil filter cover is in place inside the oil
reservoir.
the control panel assembly is placed on the connecting plate
on the back of the housing. Ensure the grooves of the
connecting plate are in the guides of the control panel
assembly.
the basket handle is locked in place in the basket. To lock the
basket handle in place, press the bars together and slide them
between the slots. Insert the ends of the bars into the bracket on
the basket and push the handle backwards. Do not assemble
any other way.
Make sure the handle is securely attached to the frying basket.
Follow the below instructions to make sure the handle is properly
attached.
www.KALORIK.com
9
FT 44466 - 180330

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido