Publicidad
Idiomas disponibles
Idiomas disponibles
Cord Management and Arm Tension Adjustment
CORD MANAGEMENT: Tighten cable
5
to top or bottom of wall mount
assembly arm (A) using cable ties (P).
• Do not remove screw or loosen screw until it is no longer engaged with the mount. Doing so may cause the
screen to fall.
ARM TENSION ADJUSTMENT: If more or less tension is desired in the arm pivot points, do the following:
• To increase tension, turn tension screw(s) clockwise with allen wrench.
• To reduce tension, turn tension screw(s) counter-clockwise with allen wrench. Do not turn more than half a turn.
Visit Peerless website at www.peerlessmounts.com
WARNING
TENSION SCREWS
10 of 30
For customer care call 1-800-729-0307 or 708-865-8870
All other brand and product names are trademarks or registered trademarks of their respective owners.
A
CORD
P
ISSUED: 01-27-08 SHEET #: 095-9283-2 03-18-08
© 2008, Peerless Industries, Inc. All rights reserved.
Publicidad
