Publicidad
Idiomas disponibles
Idiomas disponibles
2.- Next, hold of the handrails (G and
H) and lift them in the direction of the
arrow, as shown in Fig.2 and use
screws (94) to secure them.
3.-Fit the left handrail cover (10) and
the right handrail cover (11), Fig.3.
4.-Position the left and right base
covers (2) and (3) in the direction of
the arrow facing the corresponding
side bar, as shown in Fig.4 and attach
them by using screws (13), as shown
in Fig.4.
ATTENTION: Cylinder (Q) Fig.5 is
factory set to high pressure so it must
not be knocked. If it is knocked this
may
damage
operation of the treadmill.
FOLDING YOUR UNIT.-
This treadmill is equipped with a
safety release mechanism for folding
purposes.
Before attempting to fold the unit, stop
the belt, lower the elevation setting to
minimum and unplug the cable from
the mains socket.
To fold and store the unit follow the
instructions below:
First, using one hand, pull the red
knob marked number (1) in the
direction of the arrow, Fig.5 A.
Then, without releasing the red knob,
use the other hand to lift the machine,
marked number (2), in the direction of
the arrow as shown in Fig.5A.
Lift and fold the machine up until you
hear it lock into position (S).
Store your unit in a dry place,
preferably not subject to changes in
temperature.
it
and
impair
UNFOLDING YOUR UNIT.-
To unfold the machine carry out the
procedure in reverse, i.e. hold the
machine with one hand and use the
other hand to pull pin (S) in the
direction of the arrow, Fig.5 and lower
the machine gently onto the floor. and
lower the machine gently onto the
floor. When folding or unfolding the
treadmill make sure that there are no
children about or obstacles that might
hinder the folding motion.
MOVEMENT & STORAGE.-
The unit is equipped with wheels (P),
Fig.6 to make it easier to move. Make
sure that the mains cable is unplugged
from the wall socket.
the
If you wish to move the treadmill, the
first thing to do is to fold it up, place
your hands on the handrails (G & H)
and tilt the treadmill, Fig.6, so that the
wheels (P) rest on the floor.
To prevent accidents DO NOT move
the treadmill across uneven floors.
MAINTENANCE.-
Use the bottle of lubricant (83) to
lubricate the inside of the belt in order
to keep your unit in top condition and
to ensure that friction between the belt
and the board is kept to a minimum,
Fig.7 (due to different running styles,
always apply more lubrication to the
area where you place your feet during
the exercise).
It is advisable to lubricate the base of
the belt between the board and the
band every month, depending on how
often it is used.
17
Publicidad
