Installation Instruction; About Power Connection - EAS ELECTRIC EMD12X3-V1 Manual De Instrucciones

INSTALLATION INSTRUCTION

WARNING
Attention
The installation of the pipes and electrical equipments should be
done by professionals.

About Power Connection

WARNING
For personal safety:
Do not use an extension cord or an adapter
plug with this appliance.
Do not, under any circumstances, cut or remove
the earthing connection from the power cord.
Electrical requirements
Please look at the rating label to know the rating voltage and connect
the dishwasher to the appropriate power supply. Use the required fuse
10A/13A/16A, time delay fuse or circuit breaker recommended and provide
separate circuit serving only this appliance.
Electrical connection
Ensure the voltage and frequency of the power being corresponds to
those on the rating plate. Only insert the plug into an electrical socket
which is earthed properly. If the electrical socket to which the appliance
must be connected is not appropriate for the plug, replace the socket,
rather than using a adaptors or the like as they could cause overheating
and burns.
Ensure that proper earthing exists before use
Electrical Shock Hazard
Disconnect electrical power
before installing dishwasher.
Failure to do so could result in
death or electrical shock.
16
V.2