Filling The Detergent Dispenser - EAS ELECTRIC EMD12X3-V1 Manual De Instrucciones

Filling The Detergent Dispenser

1
Sliding it to the right
2
Please choose an open way
1
according to the actual
situation.
1. Open the cap by sliding the
release catch.
2. Open the cap by pressing
down the release catch.
NOTE:
Be aware that depending on the soiling of water, setting may be
different. Please observe the manufacturer's recommendations on the
detergent packaging.
Press down
A A
B B
Add detergent into the larger
2
cavity (A) for the main wash cycle.
For better cleaning result,
especially if you have very dirty
items, pour a small amount of
detergent onto the door. The
additional detergent will activate
during the pre-wash phase.
Close the flap by sliding it to the
3
front and then pressing it down.
41
V.2