Connection Of Drain Hoses - EAS ELECTRIC EMD12X3-V1 Manual De Instrucciones

Connection Of Drain Hoses

Insert the drain hose into a drain pipe with a minimum diameter of 4 cm, or
let it run into the sink, making sure to avoid bending or crimping it. The
height of drain pipe must be less than 1000mm. The free end of the hose
must not be immersed in water to avoid the back flow of it.
Please securely fix the drain hose in either position A or position B
Back of dishwasher
Mains Cable
How to drain excess water from hoses
If the sink is 1000 higher from the floor, the excess water in hoses cannot
be drained directly into the sink. It will be necessary to drain excess water
from hoses into a bowl or suitable container that is held outside and lower
than the sink.
Water outlet
Connect the water drain hose. The drain hose must be correctly fitted to
avoid water leaks. Ensure that the water drain hose is not kinked or
squashed.
Extension hose
If you need a drain hose extension, make sure to use a similar drain hose.
It must be no longer than 4 meters; otherwise the cleaning effect of the
dishwasher could be reduced.
Syphon connection
The waste connection must be at a height less than 100 cm (maximum)
from the bottom of the dish. The water drain hose should be fixed.
Drain hose
Water Inlet
Drain Pipe
18
A
B
Counter
V.2