Technical Specifications - Kärcher KM 130/300 R LPG Manual Del Usuario

Machine data
Drive speed, forward
Drive speed, reverse
Climbing capability (max.)
Surface cleaning performance without side brushes
Surface cleaning performance with 1 side brushes
Working width without side brushes
Working width with 1 side brushes
Protection type, drip-proof
Usage duration when tank is full
Engine
Type
Type
Cooling type
Rotation direction
Holes
Hub
Cylinder capacity
Amount of oil
Operating speed
Max. speed
Dry run speed
Max. power
Maximum torque at 2400 rpm
Oil filter
Suction air filter
Fuel type
Tank content
Electrical system
Battery
Generator, rotary current
Starter
Hydraulic system
Oil quantity in the entire hydraulic system
Oil quantity in hydraulic tank
Oil grades
Engine (above 25 °C)
Engine (0 to 25 °C)
Engine (below 0 °C)
Hydraulics
Waste container
Max. unloading height
Volume of waste container
Roller brush
Roller brush diameter
Roller brush width
Speed
Sweeping track
Side brushes
Side brush diameter
Speed (continuous)
Tyres
Size, front
Air pressure, front
16

Technical specifications

14
-
EN
KM 130/300 R LPG *KNA
1.186-137.0
km/h (mph) 10 (6.2)
km/h (mph) 10 (6.2)
-- 18%
m /h (ft /h) 10000 (108000)
2 2
m /h (ft /h) 13000 (140000)
2 2
mm (in) 1000 (39)
mm (in) 1300 (51)
-- IPX 3
h 4
-- Kubota WG 972
-- 3-Cylinder 4-stroke gas engine
-- Water cooling
-- Anticlockwise direction
mm (in) 74,5 (2.93)
mm (in) 73,6 (2.89)
cm (yd ) 962 (1.26)
3 3
l (gal) 3,7 (0.977)
rpm 2350
rpm 2550
rpm 1500
kW/PS 17,5/23,5
Nm 66,3
-- Filter cartridge
-- Internal filter cartridge, external filter car-
tridge
Liquid gases (propellants): Butane and propane or a mix-
ture of butane/propane
30 litres/ 7.9 gal (replacement cylinder)
V, Ah 12, 62
V, A 12, 80
-- Electrical starter
l (gal) 26,5 (7)
l (gal) 21,2 (5.6)
-- SAE 30, SAE 10W-30, SAE 15W-40
-- SAE 20, SAE 10W-30, SAE 10W-40
-- SAE 10W, SAE 10W-30, SAE 10W-40
-- HV 46
mm (in) 1400 (55.1)
l (gal) 300 (79.25)
mm (in) 300 (11.81)
mm (in) 1000 (39.37)
rpm 350
mm (in) 80 (3.15)
mm (in) 600 (23.62)
rpm 0 - 60
-- 15-4.5x8
bar 8