Accessories; Technical Specifications; Spare Parts; Eu Declaration Of Conformity . En - Kärcher BD 43/35 C Ep Manual De Instrucciones

Description
Disk brush, red (medium, standard)
Disk brush, natural (white)
Disk brush, black (hard)
Driver plate pad
Pad, white
Pad, red (medium soft)
Pad, green (medium hard)
Pad, black (hard)
Pad, beige (natural hair proportion)
Suction bar, 850 mm, straight
Suction bar, 850 mm, bent
Set homebase box
Mop holder

Technical specifications

Power
Nominal voltage
Frequency
Average power consumption W
Rated power suction tur-
bine
Rated power brush drive
Vacuuming
Vacuum power, air volume
(max.)
Vacuuming power, nega-
tive pressure (max.)
Cleaning brushes
Brush speed
Brush diameter
Dimensions and weights
Theoretical surface clean-
ing performance
Max. working range incline
Fresh/waste water tank vol-
ume
Max. water temperature
Ambient temperature
Net weight (transport weight) kg
Total weight (ready to oper-
ate)
Values determined as per EN 60335-2-72
Total oscillation value
Uncertainty K
Sound pressure level L
pA
Uncertainty K
pA
Sound power level L +
WA
Uncertainty K
WA
Exception according to Regulation (EU)
2019/1781 Annex I Section 2 (12): j)

Spare parts

– Only use accessories and spare parts
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and trouble free.
– At the end of the operating instructions
you will find a selected list of spare
parts that are often required.
– For additional information about spare
parts, please go to the Service section
at www.kaercher.com.
14
EU Declaration of Conformity
We hereby declare that the machine de-
scribed below complies with the relevant
V 230
basic safety and health requirements of the
Hz 50
EU Directives, both in its basic design and
1400
construction as well as in the version put
W 550
into circulation by us. This declaration shall
cease to be valid if the machine is modified
W 850
without our prior approval.
Product:
l/s 20
Type:
kPa 12,0
Relevant EU Directives
(mbar) (120)
2006/42/EG (+2009/127/EG)
2014/30/EU
1/min 235
2011/65/EU
mm 430 Commission regulation(s)
(EU) 2019/1781
Applied harmonized standards
m²/h 1800
EN 60335–1
EN 60335–2–72
% 2
EN 62233: 2008
l 35/35
EN 55014-1:2006 + A1: 2009 + A2:2011
EN 55014-2:1997 + A1: 2001 + A2: 2008
°C 60
EN 61000-3-2:2014
°C 5...40
EN 61000-3-3:2013
56
Applied national standards
kg 91
-
The signatories act on behalf of and with of
m/s <1,3
the authority of the company management.
2
m/s 0,2
2
dB(A) 70
dB(A) 2
dB(A) 86
Chairman of the Board of Management
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Straße 28-40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2021/09/01

Accessories

Part no.: Description
4.905-022.0 For the use with all common cleaning tasks.
4.905-023.0 Made of natural fibres for spot cleaning and polishing.
4.905-025.0 For heavy soiling and for deep cleaning. For robust floorings only.
4.762-533.0 For cleaning with pads. With quick change coupling and center lock.
6.369-469.0 For polishing floors.
6.369-470.0 For cleaning and cleanering of all floors.
6.369-472.0 For cleaning heavily soiled floors and for deep cleaning.
6.369-473.0 With stubborn soiling and for deep cleaning.
6.371-081.0 For polishing and refreshing of hard and flexible floorings.
4.777-401.0
4.777-411.0
4.035-406.0
9.753-023.0
Floor cleaner
1.127-xxx
1.515-xxx
Director Regulatory Affairs & Certification
6
-
EN

Declaration of Conformity

We hereby declare that the product de-
scribed below complies with the relevant
provisions of the following UK Regulations,
both in its basic design and construction as
well as in the version put into circulation by
us. This declaration shall cease to be valid
if the product is modified without our prior
approval.
Product: Floor cleaner
Type: 1.127-xxx
1.515-xxx
Currently applicable UK Regulations
S.I. 2008/1597 (as amended)
S.I. 2016/1091 (as amended)
S.I. 2012/3032 (as amended)
Commission regulation(s)
(EU) 2019/1781
Designated standards used
EN 60335–1
EN 60335–2–72
EN 62233: 2008
EN 55014-1:2006 + A1: 2009 + A2:2011
EN 55014-2:1997 + A1: 2001 + A2: 2008
EN 61000-3-2:2014
EN 61000-3-3:2013
National standards used
-
The signatories act on behalf of and with of
the authority of the company management.
Chairman of the Board of Management Director Regulatory Affairs & Certification
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Straße 28-40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2021/02/01