Datos Complementarios; Homologación De Equipos Inalámbricos; Datos Técnicos De Ángulo De Montaje Sin Conjunto De Manija; Datos Técnicos De Ángulo De Montaje Con Conjunto De Manija - Pilz PSEN ml sa 1.1 Manual De Instrucciones

Datos complementarios

16 Datos complementarios
16.1 Homologación de equipos inalámbricos
USA/Canada
VT8-PSENML
FCC ID:
IC: 7482A-PSENML
FCC/IC-Requirements:
This product complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standards.
Operation is subject to the following two conditions:
1) this product may not cause harmful interference, and
2) this product must accept any interference received, including interference that may cause undesired operation.
Changes or modifications made to this product not expressly approved by Pilz may void the FCC authorization to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
Le présent produit est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) le produit ne doit pas produire de brouillage, et
(2) l'utilisateur de le produit doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
16.2 Datos técnicos de ángulo de montaje sin conjunto de manija
Generalidades
Certificaciones
Datos mecánicos
Fuerza de retención FZh
según ISO 14119
Fuerza de retención F1-
máx según ISO 14119
Peso
16.3 Datos técnicos de ángulo de montaje con conjunto de
manija
Generalidades
Certificaciones
Datos mecánicos
Fuerza de retención FZh
según ISO 14119
Fuerza de retención F1-
máx según ISO 14119
Peso
Manual de instrucciones PSEN ml sa 1.1/2.1/2.2
1005296-ES-02
570492
CE
570492
–
–
420 g
570495
CE
570495
3000 N
6000 N
260 g
570493
CE
570493
3000 N
6000 N
420 g
570496
CE
570496
3000 N
6000 N
600 g
570494
CE
570494
3000 N
6000 N
445 g
570497
CE
570497
3000 N
6000 N
630 g
| 84