General Safety Rules - Bosch GLM 40 Instrucciones De Funcionamiento

Ocultar thumbs Ver también para GLM 40:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

!
WARNING
hazardous radiation exposure, electric shock, fire and/or
serious injury. The term "tool" in the warnings listed below
refers to your mains-operated (corded) tool or battery-operated
(cordless) tool.
SAVE ALL WARNINGS AND INSTRUCTIONS
The following label is on your laser
tool for your safety. ALWAYS BE
AWARE of its location when using
the tool.
DO NOT direct the
laser beam at persons
or animals and do not
stare into the laser beam yourself. This tool
produces class 2 laser radiation and complies
with 21 CFR 1040.10 and 1040.11 except for deviations
pursuant to Laser Notice No. 50, dated June 24, 2007. This
can lead to persons being blinded.
Working safely with the
measuring tool is possible
only when the operating
and safety information
are read completely and
the instructions contained
therin are strictly followed.
Never make warning labels
on the Measuring tool
unrecognizable.
Never aim the beam at a
workpiece with a reflective
surface. Bright shiny
reflective sheet steel or

General Safety Rules

Read all instructions. Failure to follow all
instructions listed below may result in
FOR FUTURE REFERENCE
Safety Rules
similar reflective surfaces are
not recommended for laser
use. Reflective surfaces could
direct the beam back towards the
operator.
Take care to recognize the
accuracy and range of the
device. Measurement may not
be accurate if used beyond the
rated range of the device.
Use of controls or
adjustments or performance
of procedures other than
those specified herein may
-5-

Publicidad

Tabla de contenido
loading

Tabla de contenido