Unit Description; Initial Use - Beurer LW 110 Instrucciones De Uso

Handling
IMPORTANT
The device must be switched off and disconnected from the mains every time after use and before
cleaning.
• Do not place any objects in device openings or in rotating parts. Ensure that the moving parts can
move freely at all times.
• Do not place any objects on the device.
• Do not expose the device to high temperatures.
• Avoid water damage by carefully handling the device (e.g. water damage from splashing in the
vicinity of wooden floors).

4. Unit description

1. Fan button
2. On/Off button
3. Air inlet
4. LCD display
5. Air outlet
6. Fill level sensor
7. Marker point for the cor-
rect attachment of the
holder
8. Handle recess
9. Lock
10. Fan unit
11. Upper cover
12. Holder
13. Humidification discs
14. Tub

5. Initial use

Remove the transport lock
• Open the cardboard packaging.
• Keep the plastic covering closed and lift the device out using the handle recesses on the upper cover.
• Now remove all plastic films.
• Check the device, mains plug and cable for damage.
• Lift off the upper cover with the fan unit, lift out the humidification discs at the holder and remove the
transport lock from the tub and the fan unit. Check whether all transport locks have been removed.
• Reinsert the humidification discs. The holder automatically falls to the side and the humidification discs
are secured. Make sure that the red spot is on the top of the holder.
1
2
3
4
5
6
7
8
9
13
10
11
12
13
14