Num'axes Canicom 250 LE Manual De Instrucciones página 19

Gb - 19
- Activate : approach the red mark located on the remote control until coming in contact on red mark
located on the receiver collar for 1 second (ref. Diagram 4). The indicator light on the collar will flash in
green indicating that the CANICOM receiver is on.
- Deactivate : approach the red mark located on the remote control until coming in contact on red mark
located on the receiver collar for 1 second (ref. Diagram 4). The indicator light on the collar will flash
from green to red and then off: the CANICOM receiver is off.
To increase the battery life of the receiver collar, you should deactivate the unit if you are not using
your product for a long period.
Diagram 4
Approach until coming in contact those 2 areas
during 1 second
REMOTE CONTROL
RECEIVER COLLAR
 Coding of the remote control and receiver collar
Each remote control has its individual radio operator code. The coding of the remote control with the
receiver collar enables the two units to work together.
IMPORTANT: before beginning the coding, make sure no other person is using his CANICOM 250 LE
or other products from the NUM'AXES range close by: your receiver collar could accidentally
record the code of his remote control. If that occurs, re-code the remote control with the receiver
collar.