Rear Panel; Sockets Panel - voestalpine Böhler URANOS 3200 GSM Instrucciones De Uso

E56 Voltage level exceeded (Alarm)
E64 Voltage level exceeded (Warning)
E57 Voltage level exceeded (Alarm)
E65 Voltage level exceeded (Warning)
E60 Speed limit exceeded
E68 Speed limit exceeded
E61 Speed limit exceeded
E69 Speed limit exceeded
E70 Incompatible "WARNING" alarm
E71 Liquid coolant overtemperature alarm
E72 Blocked motor alarm
E73 Wire supply alarm
E74 Motor 1 current level exceeded (Warning)
E75 Motor 2 current level exceeded (Warning)
E76 Liquid coolant flow level exceeded
(Warning)
E77 Coolant temperature level exceeded
(Warning)
E78 Active maintenance alarm
(Automation and robotics)
52
(Alarm)
(Warning)
(Alarm)
(Warning)

3.14 Rear panel

1 Off/On switch
Turns on the electric power to the welder.
It has two positions, "O" off, and "I" on.
2 Signal cable (CAN-BUS) input (RC)
3 Signal cable (CAN-BUS) input (Cable bundle)
4 Gas fitting (TIG)
5 Power supply cable
Connects the system to the mains.

3.15 Sockets panel

1 Gas fitting
2 Torch button connection
External devices CAN BUS (torches).
3 Negative power socket
Allows the connection of the earth cable in MMA, MIG/
MAG and Pulsed MIG.
4 Negative power socket
For connection of earth cable in electrode welding or of
torch in TIG.
5 Positive power socket
For connection of electrode torch in MMA or earth
cable in TIG.