Technical Specifications - voestalpine Böhler TERRA 180 Instrucciones De Uso

7 TECHNICAL SPECIFICATIONS

Power supply voltage U1 (50/60Hz)
*
Zmax (@PCC)
Slow blow line fuse
Maximum input power (kVA)
Maximum input power (kW)
Power factor PF
Efficiency (µ)
Cos
Max. input current I1max
Effective current I1eff
Welding current (40°C)
(x=35%)
(x=60%)
(x=100%)
Welding current (25°C)
(x=100%)
Adjustment range I2
Open circuit voltage Uo
IP Protection rating
Insulation class
Manufacturing Standards
Dimensions (lxdxh)
Weight
Power supply cable
Lenght of power supply cable
*
This equipment complies with EN/IEC 61000-3-11 if the maximum permissible mains impedance at the interface point to the public grid
(point of common coupling, PCC) is smaller than or equal to the Zmax stated value. If it is connected to a public low voltage system, it is
the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the
equipment may be connected.
*
This equipment does not comply with EN/IEC 61000-3-12. If it is connected to a public low voltage system, it is the responsibility of the
installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the equipment may be
connected. (Consult the "Electromagnetic fields & interferences" - " EMC equipment classification in accordance with EN/IEC 60974-10" sec-
tion).
26
TERRA 180
1x230V ±15%
206mΩ
16A
8.5 kVA
5.9 kW
0.70
83%
0.99
36.8 A
21.8 A
170A
150A
120A
150A
3-170A
80Vdc
IP23S
H
EN 60974-1/ EN 60974-10
410x150x330 mm
8.0 kg.
3x2.5 mm2
2 m