Roof Reinforcement / Power Supply - Webasto Cool Top Trail 34 Instrucciones De Operación Y Instalación

850 515
Fig. 02: Installation measures (top/bottom view)
1122 mm
233
mm
Fig. 03: Installation measures (side view)
4.5

Roof reinforcement / power supply

2
Fig. 05: Roof reinforcement
≥ 20 mm
3
Fig. 06: Cut-out with wooden reinforcement
Cool Top Trail 34
354
154
(174)
400
(360)
400
(360)
575
1122
25-70 mm
575 mm
1
≥ 20 mm
1
3 3 2
■ The figures show the required installation space
for the outdoor unit and the air distributor on the
inside for the two different cut-out versions.
■ Centre the air distributor with the cut-out.
1
1. Position of the outdoor unit
2
2. Position of the air distributor
3. Square cut-out
F = Direction of travel
F
Measures in mm.
3
Fig. 04: Installation measures (front view)
The cut-out shall be reinforced with a wooden frame
using wooden bars which are at least 20 mm wide. In-
sulation material may have to be removed beforehand.
This reinforcement frame is to ensure that the roof will
not crush from the installation bolts and that air con-
ditioned air does not enter the ceiling space.
1. Roof
2. Wooden bars
1. Cut-out
2. Insulation in roof
3. Wooden bars
850 mm
49 mm
515 mm
8