ION Vinyl Motion Air Guia De Inicio Rapido página 7

Using Vinyl Motion Air With Your Computer
Recording
To record music to your computer, you can use ION EZ Vinyl/Tape Converter and a USB cable. EZ
Vinyl/Tape Converter conveniently saves your recordings to your computer. After you finish converting your
vinyl, you can then burn to CD or load onto portable media devices.
To install the software, insert the included CD into your computer, and follow the on-screen instructions.
1. With EZ Vinyl/Tape Converter installed on your computer, use the included USB cable to connect
Vinyl Motion Air's USB port to an available USB port on your computer.
On your computer, you can open EZ Vinyl/Tape Converter by going to Start Menu  All Programs
2.
(Windows) or the Applications menu (Mac).
3. Follow the on-screen instructions to set up your recording. When prompted to play your music, move
Vinyl Motion Air's tonearm over the record to start playback.
Note: To listen to a record while it's playing, listen through your computer's speakers, or connect Vinyl
Motion Air's RCA outputs to a stereo system or powered speakers. Do not connect them to phono-
level inputs; Vinyl Motion Air's RCA outputs are line-level and could damage a device with phono-level
inputs.
4. When you have finished recording, raise Vinyl Motion Air's tonearm from the record and return it to its
arm clip.
Visit ionaudio.com/computer-optimization for more information on optimizing your computer for audio.
Playback
You can listen to the music on your computer through its internal speakers or through headphones
connected to it. (Vinyl Motion Air cannot be used as a playback device for your computer's audio.)
To listen to a record while it's playing, listen through your computer's speakers, or connect Vinyl Motion
Air's RCA outputs to a stereo system or powered speakers. Do not connect them to phono-level inputs;
Vinyl Motion Air's RCA outputs are line-level and could damage a device with phono-level inputs.
7