SOMFY Axovia 160 S NS Manual Del Usuario página 21

1
Electric connections
J Connect the antena.
For an optimal functioning, it
recommended to exit the box antenna
wire through a grommet :
Never cut the antena wire.
J Connecting the power supply cable.
For your safety, these operations must be done with power off.
Pass the wire in the stuffing box.
1
Connect the ground wire.
2
A ground wire (green/yellow) must be used for
certain accessories (lighting 230V- Class I).
Blue wire
The wiring colors must
Red/brown,black wire
be respected.
Green/yellow wire
Tighten the stuffing box. Pull on the
4
cable to check that it is correctly
blocked.
PROG
AUTO
ON/OFF
is
PROG
AUTO
ON/OFF
Connect the phase and the neutral.
3
Pull on the cable to check that it is
correctly blocked.
Neutral
Phase
PROG
Ground
AUTO
ON/OFF
2
Parametering your SGS/AXOVIA
I The steps:
J Presentation of the symbols.
J Parametering your SGA/AXOVIA.
J Using precautions for the automatic mode.
J Securization of parametering.
J Presentation of the symbols.
Long press
over 0,5 seconds
Short press
under 0,5 seconds
J Memorising remote controls
Before starting the parametering your installation, check that the ON/OFF and PROG
lights are lit and the DANGER light is off.
Do the following operations :
G
Functioning of the remote controls :
Your SGA /AXOVIA can function with one or several remote controls. The
operations described below must be repeated as often as there are remote controls
to memorize.
Your SGA / AXOVIA offers 2 different mode of
functioning :
Total opening only
Systematic total opening of the 2 leaves per short
or long press on remote control.
Pedestrian opening or total opening
Opening of only one leaf for pedestrian access by short press
on the remote control.
Total opening of the 2 leaves per long press on
remote control.
Blinking light
Lit light
21