Hanging The Fan - Kichler VASSAR Manual De Instrucciones

HANGING THE FAN

REMEMBER to turn off the power before you begin.
To properly install your ceiling fan, follow the steps below.
Step 1. Remove the decorative canopy bottom cover from the canopy
by turning the cover counter clockwise. (Fig. 5)
Step 2. Remove the ceiling mounting bracket from the canopy by
removing (and save one of the two screws. Loosen the remaining screw
by a half turn. (Fig. 5)
Step 3. Pass the 120 volt supply wires from the ceiling outlet box
through the center of the ceiling mounting bracket. (Fig. 6)
Step 4. Attach the ceiling mounting bracket to the outlet box using the
screws and washers included with the outlet box. (Fig.6)
Hanger bracket
Ceiling
canopy
Canopy
cover
Fig. 5
CUL Listed
electrial
box
Ceiling
mounting
bracket
Hook
120V Wires
Fig. 6
52" VASSAR
Washers
Mounting screws
(supplied with
electrical box)
LED | 7
TM