Panacom S149 STAGE SOUND Manual Del Usuario página 5

POWER SOURCE
1.Please charge the unit at least 4 hours before first time using.
2.Long press the POWER button on the panel to switch on or off the speaker.
CHARGE THE BATTERY
When the battery is charging, the CHARGE STATUS lights red. After the battery has fully
charged, the light turns to be green.
1.Connect the AC adaptor to the DC IN JACK of the speaker firmly, and plug it into a wall
outlet.
2.When the battery is fully charged, first disconnect the AC adaptor from the speaker,then from
the wall outlet.
3.The speaker works normally when charging.
MODE SELECTION
Press MODE button on the front panel to select the MODE(LINE,USB,BT).
REPEAT FUNCTION
1.During playing status,press REPEAT button on the front panel once to repeat playing the
current track.To cancel the repeat option,press the REPEAT button again.
2.REPEAT function only available for USB card playing modes(not for BT/Line).
PREVIOUS/NEXT BUTTON
By pressing PREVIOUS/NEXT button on the front panel ,you can select a specific song from
the play list.
PAUSE/PLAY BUTTON
To stop playing the current track,please press PAUSE/PLAY button on the front panel.Press it
once again to continue playing.
VOLUME ADJUSTMENT DIAL
Twist the dial anticlockwise to decrease the volume and clockwise to increase the volume.
MIC IN JACK
Plug in microphone directly for playing.
USB JACK
Insert USB card directly for palying
Support music formats of MP3,WMA and WAV with outstanding quality,giving a
Superior and brand-new musci listening experience.
FEATURES & SPECIFICATIONS
Speaker size: 6,5"
Lithium battery: 1800mAh
Wireless BT connection
USB/TF card
LED light
LCD display
Rechargeable battery
1 Mic input jack
1 Aux in
20W RMS power output
Pg. 5