Guide Bar And Saw Chain Combinations; Saw Chain Filing And File Gauges; Ec Declaration Of Conformity - Husqvarna 439 Manual De Instrucciones

Guide bar and saw chain combinations

The following cutting attachments are approved for the model Husqvarna 439.
Length, inch Pitch, inch
12
14 3/8
16
Saw chain filing and file gauges

EC Declaration of Conformity

(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain
saws for forest service Husqvarna 439 from 2013's serial numbers and onwards (the year is clearly stated in plain text
on the type plate with subsequent serial number), are in conformity with the requirements of the COUNCIL'S
DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the Technical data chapter. The following standards have been applied:
EN ISO 12100:2010, ISO 14982:2009, EN ISO 11681-1:2011.
Notified body: 0404, SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has carried out EC
type examination in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The certificates for EC
type examination in accordance with annex VI, have the numbers: 0404/13/2379 – 439.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna October 31, 2013
Per Gustafsson, Development manager
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
38 – English
TECHNICAL DATA
Guide bar
Gauge, mm Max. nose radius
1,3 7T
Saw chain
Length, drive links
Type
(no.)
45
Husqvarna H37 52
56