Olympus D-340L Manual De Instrucciones página 66

'97 02 25
11 : 23
OK
SET NO
66
OK
OK
SET NO
'98 12 09
12 : 35
OK
OK
SET NO
E
ADJUSTING THE DATE AND TIME
When adjusting from the camera.
Operate with the lens barrier closed
1
Press the Previous (–) button and the LCD monitor
ON/OFF button at the same time to turn on the monitor.
2
The screen is set to the Date-Print selection mode. Decide
whether to print the date with the Previous (–)/Next (+)
button, then press the OK (shutter) button.
● Press the Erase mode button to go to the date-input screen
without setting the Date-Print.
● Press the LCD monitor ON/OFF button to cancel the setting
and turn off the LCD monitor.
● Date-Print is possible only when printing directly from the P-
300 printer.
3
Enter the number for the year with the Previous (–)/Next
(+) button, then press the OK (shutter) button. When the
minutes have been entered, press the OK button to
complete the date setting and turn off the LCD monitor.
● Press the Erase mode button or the LCD monitor ON/OFF
button before completing the setting to cancel it and turn off
the LCD monitor.
● Read the Note on page 68.