74
E
TAKING PICTURES
Taking pictures using the optical viewfinder
1
Compose the picture using the optical viewfinder.
2
Depress the Shutter release button halfway. The
Condition indicator LED lights.
3
Depress the Shutter release button fully to take the
picture.
4
The camera emits two short beeps to indicate that the
shot has been taken.
5
When the Writing indicator on the control panel and the
Condition indicator LED stop blinking, the camera is ready
to take the next picture. (The writing indicator will
disappear after about 7 seconds depending on the
resolution setting.)
● Close-up correction (p. 106).
Caution:
NEVER open the card cover, eject the card,
remove the batteries, or pull the plug while the
Writing indicator is blinking.