Hitachi CR 13VB Manual De Instrucciones página 9

Front cover
Lever
Fig. 2
CAUTION:
Be absolutely sure to keep the
switch turned off and the power
cord unplugged to prevent any
accident.
(2) Push the lever in the direction of the
arrow mark shown in Fig. 3 marked
on the lever.
Lever
Fig. 3
(3) Insert the saw blade all the way into
the small slit of the plunger tip with
the lever pushing. You can mount
this blade either in the upward or
downward direction. (Fig. 4, Fig. 5)
Blade
Slit of plunger
Fig. 4
Blade
Slit of plunger
Fig. 5
(4) When you release the lever, the
spring force will return the lever to
the correct position automatically.
(Fig. 6)
Lever
Fig. 6
(5) Pull the back of the saw blade two
or three times by hand and check
that the blade is securely mounted.
When pulling the blade, you will
know it is properly mounted if it
clicks and the lever moves slightly.
(Fig. 7)
Blade
Lever
Fig. 7
English
9