Adjusting The Armpad; Maintenance - Vermeiren D200 Manual De Instrucciones

3.6

Adjusting the armpad

The armpad of your wheelchair is adjustable in height and depth. The height of the armpad
can be adjusted in 3 positions.
Height armpad to seat
220 mm (Standard)
230 mm
240 mm
The depth of the armpad can be adjusted in 3 positions.
Depth of the armpad
Front position
Middle position (Standard)
Back position
Adjust the height and the depth of the armpad as follow:
1. Remove both screws under the armpad.
2. Place the correct number of blocks under and above the tubes, see table 3.
3. Install the armpad with the required holes for depth adjustment.
4

Maintenance

For the maintenance manual of the wheelchairs refer to the Vermeiren website:
www.vermeiren.be.
Number of the blocks
under the tube
2
1
0
Table 3: Height of armpad
Used holes
Back and middle
Hole 2 and 4
Front and middle
Table 4: Depth of armpad
Page 19
Number of blocks between
tube and armpad
1
2
3
D200
2014-08