Turn On The Display And Computer - Sony SDM-S205 Serie Guía De Instalación Rápida

7
Secure the cords.
Draw the cords and cables through the cable
holder as illustrated.
Notes
• Slide up the cable holder of the height
adjustable stand to open as illustrated.
• When bounding the cords and cables, be sure to
loosen them a little. If they get pulled hard they
may come off from the connectors or plugs as
you adjust the screen angle. If you stretch the
cords and cables too hard they may get
damaged.
Turn on the display and
computer
1
Make sure that the 1 (power)
Indicator blinks red. At the time of
your purchase, the MAIN POWER
switch is set to the \ side.
Note
When the MAIN POWER switch on the right side
of your display is not set to the \ side, press the \
side and check that the 1 (power) indicator blinks
red.
2
Press the 1 (power) switch
located on the front right of the
display.
The 1 (power) indicator lights up in
green.
3
Turn on the computer.
MAIN POWER
No need for specific drivers
The display complies with the "DDC" Plug &
Play standard and automatically detects all the
display's information. No specific driver
needs to be installed on the computer.
US
1
lights in
red
2
lights in
green
5
(US)