sion cords. Examine extension cord
before using and replace if damaged.
Do not abuse extension cord and do
not yank on any cord to disconnect.
Keep cord away from heat and sharp
edges. Always disconnect the exten-
sion cord from the receptacle before
disconnecting the product from the ex-
tension cord.
If you are using an extension cord, it
should always be completely unwound
from the cable drum.
Up to 100 ft = 10/3 AWG.
WARNING
To reduce the risk of electrocution,
keep all connections dry and off the
ground. Do not touch plug with wet
hands.
SAVE THESE INSTRUCTIONS!
Please read and comply with
these original instructions
prior to the initial operation of your ap-
pliance and store them for later use or
subsequent owners.
Start up . . . . . . . . . . . . . . . .
Storage . . . . . . . . . . . . . . . .
Device elements
Please unfold the front picture side
1 Storage compartment for nozzles
2 Handle
3 High pressure connection
4 Water connection
5 Manometer
6 Oil level indicator
7 Oil tank
8 Cover
9 Power switch
10 Fastening screw for device hood
11 Storage compartment for hoses
12 Trigger gun storage clip
13 Nozzle
14 Marking of the nozzle
15 Spray lance
16 Pressure and volume regulation
17 Hand blowing gun
18 Safety lever
- 3
EN
Contents
. . 3
. . 4
. . 4
. . 4
. . 5
. . 5
. . 5
. . 7
. . 8
. . 9
. . 9
. . 9
. 10
. 10
. 11
5