Depuro Pro First Comissioning; Wheels; Connection Cable; Filter Suitability - Vortice DEPURO PRO 150 Manual De Instrucciones

4.2 DEPURO PRO FIRST COMISSIONING:

4.2.1. WHEELS: The DEPURO PRO unit comes with 4-wheel kit to be transported and moved easily
(it is not necessarily have it installed always in the same place). Before use, the wheels must be assembled
on the structure in easy and fast way; them are screwed directly to the aluminum profiles (M8 thread).
IMPORTANT: IT IS MANDATORY TO ASSEMBLE THE WHEELS ON THE STRUCTURE BEFORE THE
UNIT START. Otherwise, the DEPURO PRO would not be able to push the purified air by the bottom base
and the unit would not operate properly.
NOTE: the DEPURO PRO proper operating position is in vertical (the impeller at the bottom of the assembly). Not
use the unit lying flat or upside down. The wheels placement is a guideline of the proper equipment position.
4.2.2. CONNECTION CABLE The DEPURO PRO unit has a connection cable to plug in to the mains
electricity. If it comes separated from the set, pre-connect the universal connector to the equipment slot and
plug it in normally.

4.2.3. FILTER SUITABILITY

IMPORTANTE: Before commissioning the DEPURO PRO for first time, it is necessary to disassemble
the filters from the set and remove the packaging / plastic from the high efficiency HEPA 14 absolute
filter; it is delivered totally protected in order to keep the filter's characteristics and properties intact. (see
Fig.3)
ATTENTION: For any DEPURO PRO internal manipulation, is mandatory
the use of suitable PPE's *; minimum mask and gloves. Each unit has
two stickers (one on each removable filter cover) warning of the protection
elements use before handling the unit. Once the filter protection has been
removed, it must be placed back into the corresponding slot. (see Fig. 3)
* NOTE: In case of non-use of the EPIS specified here, the absolute filter will lose its certification and the filtering
offered degree, as well as the security provided by DEPURO PRO to avoid coming into direct contact with viruses,
bacteria, etc.
Easy fastening system detail by
handles with quick
replacement filters. Only an Allen
wrench is required to loosen,
rotate the handle, and reattach to
the correct position
changed.
and
once
The H14 HEPA filter to be disassembled and
removed from their
commissioning the DEPURO PRO (mandatory
PPE use)
protection before
Fig.3
29