6- Electrical Connection; Electrical Safety; Internal Electrical Diagram - Vortice DEPURO PRO 150 Manual De Instrucciones

6. ELECTRICAL CONNECTION
The DEPURO PRO equipment does not require electrical wiring connection before use. Plug it into the main
electrical to commissioning it is enough. It has an ON / OFF on its control to be able to start and setup it. See the control
manual attached to the product for more information and operating detail.

6.1 ELECTRICAL SAFETY

ATTENTION: DEPURO PRO is an electrical device and considered as a machine too (it
equips a motor and a rotating component; the impeller). For this reason, before carrying
out any operation, maintenance intervention or interaction with the equipment, it
must be disconnected from the electrical supply. The purpose is to avoid any
electrocution danger or the user's limbs entrapment.

6.2 INTERNAL ELECTRICAL DIAGRAM

Figure 4 shows the DEPURO PRO internal general electrical diagram for both models. For more details consult the
specific REG FILTER control manual.
Fig.4
32